Vespa PX200 SI24/24E Carburettor Dellorto SPACO - BGM PRO Faster Flow - Non-Autolube

Vespa PX200 SI24/24E Carburettor Dellorto SPACO - BGM PRO Faster Flow - Non-Autolube

The BGM FASTER FLOW SI carburettor is based on a brand new SI24/24 E Dell'Orto/Spaco carburettor.

To meet the increased fuel demand of a tuned engine the carburettor has been optimised and a modification has been made to the through hole between the glimmer chamber and the nozzle block as well as in the float chamber inlet. Normally only 1.5mm in diameter, the FASTER FLOW carburettor already has a 2.5mm bore. This enables it to supply even very large main jets with a good amount of fuel.

In addition we use a spring-loaded float needle. This prevents a too high pressure at the sensitive rubberized needle tip and can compensate vibrations very well.

These modifications lead to a clearly improved fuel supply, so that no fuel shortage occurs even with very strong exhaust systems. Especially when using an air funnel like Polini's, this measure is extremely important to keep the mixture composition stable over the whole speed range.
Here again all advantages:

• no more empty-sucked nozzle block when using a strong exhaust system
• even at power levels above 20hp still well tunable
• unobtrusive and powerful
• quiet and suitable for everyday use (separate lubrication!)

Conclusion: Very inconspicuous tuning carburettor which already has all useful modifications on board and also supplies engines with far more than 20hp safely and permanently with petrol!