Vespa Carburettors & Spares*

Vespa PX PE T5 Super Sprint Rally Old Vespa Si 20/20 24/24 Carburettor Gasket Set Autolube and None Autolube Models PX, PE, Disc, T5, T5 Classic, C...

Cable - Cable Nipple - Quick Action Throttle - Flush - 5.5mm

Dellorto Carburettor Float Needle Valve Assembly Ø=5.0mm PHBH PHBL VHSH Dellorto and Spaco, 28mm and 30mm Sizes: 170, 200, 225, 250, 300, 350, 400

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD

Vespa - Gasket - Carburettor Box to Engine - PX, PE, T5 B013739

Carburettor - Slide Needle - Dellorto - X Type - 9477 - PHBH Range X1 Through to X84 Click here for Needle Information Page/s

Vespa Si Carburettor Float Chamber Repair Kit Si 20/20 24/24 etc

Vespa PX T5 Rally Super Sprint LML Reed Si 20/20 24/24 Carburettor Gasket Repair Set LML Vespa with Reed Valve engine gaskets included, Also can be...

Dellorto 4 Sided Float Needle For Modern Ethanol Fuel Standard Lambretta, Vespa Large Frame, Vespa Small Frame. For Dellorto, Spaco, Jetex Carbur...

Dellorto Fuel Filter for SI and SH CarburettorsVespa PX PE T5 Rally Super Sprint Dellorto Si 20.20 24.24 SH Carburettor Fuel Filter As Fitted to Ve...

Adjustable Cable Nipple - Thin 4mm - Ussually slots into the Carburettor pulley arm - 4mm Attaches to the throttle inner cable.

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Vespa PX T5 Rally LML Old Vespa Choke Lever Spring Cotter Pin Clip Large - PiaggioFitment Vespa 125 VNB-TS​150 VBA-Super160 GS / ​180 SS​RallyPX80-...

Carburettor Rubber Mount for: Dellorto PHBH Dellorto VHSH Carburettors with shortened stub. Spaco Dellorto 28/ 30mm Mikuni TM27, TM 28mm, TM 30mm B...

Dellorto Gasket Set for PHBH Carburettors

Vespa - Choke Arm Spring Clip - Small - PX, PX, Rally, T5

Vespa PX LML 125cc Carburettor Carb Repair Kit Si 20/20D  Carb Repair kit for Traditional 20/20D Carb setup - as originally fitted to Vespa PX 125 ...

Vespa - Crankcase Autolube Hole Plug Allows you to fill the autolube hole plug found on the crankcase when using bigger carbs. Fitted using a ham...

Lambretat Vespa 30mm PHBH Carburettor Dellorto 2 Stroke Lightweight Alloy Left hand side idle screw fitment as standard ( viewing from the front o...

Vespa Lambretta PHBL PHBH Dellorto 70 Degree Carb Throttle Elbow KitDellorto Carburettor Cable Adjuster with 70 Degree Elbow. Thread: 6mm at carb e...

Vespa - Gasket - Carburettor Box to Carburettor Autolube Models of - LML STAR 125 2 STROKE VESPA COSA 200 VESPA PX 125 E 1981>1984 VESPA PX 125...

Vespa - Carburettor - Fixing T Bolt / Nut Rally, Super, PX, PE

Vespa - Float for Si Carburettor. Rally, Super, Old Vespa, PX, PE, T5, Cosa Part Number: 4567

Cable Barrel Nipple - M5.5mm diameter x 6mm wide - Solder on Ussually used for Throttle or Gear pulley.

Cable - Cable Nipple - 3mm x 3mm Slide Nipple - Requires Soldering - Inside hole is tapered at one end to prevent the solder from pulling through....

Vespa Lambretta PHBL PHBH Dellorto 50 Degree Carb Throttle Elbow KitDellorto Carburettor Cable Adjuster with 50 Degree Elbow. Thread: 6mm at carb e...

Vespa Gasket for Autolube Pump - PX EFL, PXE, Disc, T5, T5 Classic - and Old Autolube Vespa

Vespa - Slide Pulley Rod for Si Carburettor - P125X, P150X, P200E, Super, sprint, Rally, Old Vespa. All None Auto Lube Models

Vespa Small Frame Dellorto SHB Carburettor Gasket Set - 52553 Dellorto SHB and SHBC Carbs

Cable Barrel Nipple - M5 x 7.6mm - Solder on