Vespa Cable Accessories*

Cable - Cable Nipple - Quick Action Throttle - Flush - 5.5mm

Vespa Emergency Cable Repair Kit Set for All Standard and Sports Types Consists of: 1 x Clutch / Front Brake / Rear brake cable inner with M8 Barre...

Cable Nipple Kit - For Rebuilds Kit Contains:3 x Gear and Clutch trunnions for the Gear Selector Box and Clutch Arm.3 x 5mm Cable Adjusters for Clu...

Lambretta or Vespa Emergency Cable Repair Kit Set for All Standard and Sports Types. Consists of: 1 x Clutch / Front Brake / Rear brake cable inner...

Tool - Cable Puller - With Thumb Lock Pulls Cables and Slides NippleThird Hand Suitable for all cables As used on the following, Auto scooters Mot...

Vespa Lambretta Universal M7 Cable Adjuster For Lambretta Gear / Clutch or Vespa Rear Brake.

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD

Vespa - Cable Clamp Assembly - Rear Brake LML STAR DELUXE VESPA 100 VESPA 100 SPORT VESPA 150 GL VESPA 150 SPRINT VESPA 150 SUPER VESPA 5...

Vespa PX, PK, T5 Classic, T5 - Plastic Cable End Cap - Short - For Gear or Throttle Cable. PX, PE, T5 Classic Headset Requires 2 short, 1 Long T5 m...

Adjustable Cable Nipple - Thin 4mm - Ussually slots into the Carburettor pulley arm - 4mm Attaches to the throttle inner cable.

Cable - Cable End Caps Dimensions: 5mm inside diameter, 10.5mm long

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Vespa Lambretta Scooter Motorbike Chrome Cable Cover Wrap Tidy 6.2mm x 1.5m 6.2mm internal diameter (can be used on thicker cables buy wrapping ar...

Vespa - Clutch Cable Gator/Gaiter/Gaitor/Grommet - PX, PE, T5, Rally, Super, Old Vespa, All Large Frame, and LML Fits between the M5 cable adjuster...

Vespa PX PK T5 Classic - Headset Gear Cable End Cap - Long - Plastic Headset Requires 2 short, 1 Long Alternative part number NT-139913

Brake Light Switch - Front or Rear Compression Switch - Inserts Into Outer Cable How to fit to a scooter that does not normally have a front brake ...

Vespa - Cable - Cable Top Hat Split ID 8.2 OD 9.5mm Total Length 17mm Locates the clutch and front brake outer cables into the headset base.

Vespa Lambretta PHBL PHBH Dellorto 70 Degree Carb Throttle Elbow KitDellorto Carburettor Cable Adjuster with 70 Degree Elbow. Thread: 6mm at carb e...

Vespa Lambretta M7 Cable Adjuster Screw - Polished Stainless Steel For Vespa Front Brake / Clutch / Gear Thread size = 7mm Total Length, tip to tip...

M8 Cable Adjuster - M8 Cable Hole Diameter - 4mm

Vespa - Cable - Pinch Bolt And Nut - Front Brake - PX1, P2, V50, Prim, Super, Old Vespa

Cable Nipple - PK Split Barrel Nipple For Vespa PK with original Plastic/Nylon type Levers fitted. If Chrome or Dog leg levers have been fitted ...

Vespa - Rear Brake Cable Adjuster Nut - For models with the adjuster fitted to the Rear brake inner cable. Vespa T5 M6 Thread.

Cable Barrel Nipple - M5.5mm diameter x 6mm wide - Solder on Ussually used for Throttle or Gear pulley.

Cable - Cable Nipple - 3mm x 3mm Slide Nipple - Requires Soldering - Inside hole is tapered at one end to prevent the solder from pulling through....

Vespa Lambretta PHBL PHBH Dellorto 50 Degree Carb Throttle Elbow KitDellorto Carburettor Cable Adjuster with 50 Degree Elbow. Thread: 6mm at carb e...

Vespa - Cable Clamp Assembly - Front Brake Known To Be Suitable For, LML STAR DELUXE VESPA 100 VESPA 100 SPORT VESPA 150 GL ...

Cable - Small Cable Top Hat ID 6mm OD 7mm Total Length 9mm Locates the clutch and front brake outer cables into the headset base.

Cable - Small Cable Top Hat ID 7mm OD 8mm Total Length 11mm Locates the clutch and front brake outer cables into the headset base.

Cable Barrel Nipple - M5 x 7.6mm - Solder on

Vespa Carb Box Cable Adjuster Nut and Screw For Your Information: Thread Size M6 x .75mm Pitch Screw Part Number: 002612 Nut Part Number: 002613

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre - Please amend quantity to length required (eg 1x = 1mtr., 2x = ...

Cable - Cable End Cap Dimensions: 7mm inside diameter, 11mm long

Vespa - Cable - Pinch Bolt And Nut - Rear Brake - PX1, P2, V50, Prim, Sprint, Old Vespa

Vespa Rally Sprint Super Brake Pedal Cable Clamp - Stainless Steel

Cable - Cable Nipple - Short Trumpet/Pear - Brass Solder On 5mm Long x 10mm Trumpet With 2mm Hole

Cable - Cable Nipple - Adjustable Top Hat Type - Overall Size - 12mm x 8mm Hole Diameter 1.9mm

Vespa PX, PK, T5 Classic, T5 - Plastic Cable End Cap - For Gear or Throttle Cable. Includes: 2 Short Caps 1 Long Caps Supplied in either black or...

Vespa Front Brake Clutch Gear Cable Adjuster - M5  

Cable Cover - Packet 1.5 metre x 5mm Internal Diameter (can be use on cables around this thickness) Available in Red, Blue or Yellow - Glossy (ca...

Vespa Lambretta Scooter Motorbike Metallic Red Cable Cover Wrap 6.2mmx1.5mm Available in Red, Blue, or Purple metallic effect. (can be used on th...

Cable - Universal Outer Nylon Lined 50 Metres Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear 5mm Outside Diameter, 2....

Vespa Lambretta Scooter Motorbike Metallic Blue Cable Cover Wrap 6.2mmx1.5mmCable Cover - Packet 1.5 metre x 6.2mm Internal Diameter (can be use on...

CUSTOM Cable Top Hat for EFL / T5 / Some PK125 Front Hub Back Plate. Stainless Steel This Part is Necessary when Producing an Extra Long Fron...

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre - Please amend quantity to length required (eg 1x = 1mtr., 2x = ...

Cable - Cable Nipple - Short Trumpet/Pear - Brass Solder On 5mm Long x 6mm Trumpet With 2mm Hole

Vespa - Front Brake Cable Adjuster Nut - For models with the adjuster fitted to the front brake inner cable. M5 Thread.

Vespa PX PK T5 Classic - Headset Gear Cable End Cap - Long - Plastic Includes 3 Long Caps Alternative part number NT-139913