Universal Cables Hoses And Accessories*

Cable - Cable Nipple - Quick Action Throttle - Flush - 5.5mm

Lambretta Vespa Clutch, Front Brake, Rear Brake Cable Inner With M8 barrel endUniversal inner Cable For Clutch / Front Brake / Rear Brake - All mod...

Tool - Cable Puller - With Thumb Lock Pulls Cables and Slides NippleThird Hand Suitable for all cables As used on the following, Auto scooters Mot...

Vespa Lambretta Universal M7 Cable Adjuster For Lambretta Gear / Clutch or Vespa Rear Brake.

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD

Adjustable Cable Nipple - Thin 4mm - Ussually slots into the Carburettor pulley arm - 4mm Attaches to the throttle inner cable.

Cable - Cable End Caps Dimensions: 5mm inside diameter, 10.5mm long

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Gear Cable Inner - Extra Long - As used on Vespa APE 1.7mm x 2.6 meter - 6mm barrel nipple

Brake Light Switch - Front or Rear Compression Switch - Inserts Into Outer Cable How to fit to a scooter that does not normally have a front brake ...

Universal Throttle Cable Inner 2.1 meters - All models Fixed Nipple At Carb end. Nipple Dimensions:Length 4mmWidth 3mm Requires, Adjustable Nipple ...

Vespa Lambretta M7 Cable Adjuster Screw - Polished Stainless Steel For Vespa Front Brake / Clutch / Gear Thread size = 7mm Total Length, tip to tip...

M8 Cable Adjuster - M8 Cable Hole Diameter - 4mm

Cable Nipple - PK Split Barrel Nipple For Vespa PK with original Plastic/Nylon type Levers fitted. If Chrome or Dog leg levers have been fitted ...

Clutch / Front Brake Inner Cable - Extra Long Has the standard short pear shaped top nipple. Requires a Split Barrel Nipple for it to fit into the ...

Cable - Small Cable Top Hat ID 6mm OD 7mm Total Length 9mm Locates the clutch and front brake outer cables into the headset base.

Cable - Small Cable Top Hat ID 7mm OD 8mm Total Length 11mm Locates the clutch and front brake outer cables into the headset base.

Lambretta Series 1-3 Li GP SX Cable / Wiring Loom Cable Tie Strap - Alloy MetalMetal Tie Wrap for Strapping Wiring loom or Cables to the Frame. 25c...

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre - Please amend quantity to length required (eg 1x = 1mtr., 2x = ...

Cable - Cable End Cap Dimensions: 7mm inside diameter, 11mm long

Throttle Cable Inner 2.1 meter- Fixed Nipple At Top for handlebar throttle pulley. Requires adjustable or solder on nipple for the carb end

Cable - Cable Nipple - Adjustable Top Hat Type - Overall Size - 12mm x 8mm Hole Diameter 1.9mm

Cable - Cable End Cap Dimensions: 6mm inside diameter, 10mm long

Vespa Front Brake Clutch Gear Cable Adjuster - M5  

Vespa Lambretta Scooter Motorbike Metallic Red Cable Cover Wrap 6.2mmx1.5mm Available in Red, Blue, or Purple metallic effect. (can be used on th...

Cable Adjuster Kit No soldering required, slots onto the end of the cable.

Cable - Universal Outer Nylon Lined 50 Metres Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear 5mm Outside Diameter, 2....

Banjo Bolt Dowty Washer Self-Centralising Bonded Seal M10 Priced each "The bonded seal is a metal washer with a vulcanized rubber insert f...

Vespa Lambretta Scooter Motorbike Metallic Blue Cable Cover Wrap 6.2mmx1.5mmCable Cover - Packet 1.5 metre x 6.2mm Internal Diameter (can be use on...

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre - Please amend quantity to length required (eg 1x = 1mtr., 2x = ...

Stainless Steel Braided Hose with Smooth Bore PTFE Teflon Tube.

Banjo Bolt - Thread M10 x 1.25 mm pitch - Stainless Steel

Banjo Bolt - Thread M10 x 1mm pitch - Stainless Steel

Hydraulic Brake Hose Banjo - 90 degree angle - Stainless Steel Fits to the end of the brake hose by tightening up the clamp nut. No Special tool...

Lambretta Vespa Universal Disc Brake Banjo/Caliper Bleeder Screw Nipple M8 x 1.25mm - Chrome

Vespa Lambretta Cable / Wiring Loom Cable Tie Strap - Alloy Metal Pack of 10Metal Tie Wrap for Strapping Wiring loom or Cables to the Frame. 25cm L...

Vespa PX T5 Rally Super Sprint SmallFrame Lambretta Series 1-3 BGM Original Cable Barrel Ø8x9mm (high head type)BGM screw/clamp nipples are manufac...

Vespa Lambretta Scooter Motorbike Metallic Purple Cable Cover Wrap 6.2mmx1.5mmCable Cover - Packet 1.5 metre x 6.2mm Internal Diameter (can be use ...

Venhill Hydraulic Brake Hose Banjo - 45 degree angle - Chrome Plated Fits to the end of the brake hose by tightening up the clamp nut. No Specia...

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear 50 Meter - 5mm Outside Diameter, 2.5mm Inside Diameter Black

Vespa Lambretta Scooter Motorbike Metallic Gold Cable Cover Wrap 6.2mmx1.5mmCable Cover - Packet 1.5 metre x 6.2mm Internal Diameter (can be use on...

Venhill - Banjo Bolt - Thread M10 x 1.25 pitch - Chrome Plated. Take 6mm Allen Bolt

Vespa Lambretta Cable / Wiring Loom Cable Tie Strap - Alloy Metal Pack of 20Metal Tie Wrap for Strapping Wiring loom or Cables to the Frame. 25cm L...

Vespa Lambretta Cable / Wiring Loom Cable Tie Strap - Alloy MetalMetal Tie Wrap for Strapping Wiring loom or Cables to the Frame. 25cm Long - 6mm Wide

Vespa Lambretta M5 Cable Adjuster Screw - Polished Stainless Steel For Vespa Front Brake / Clutch / Gear Thread size = 5mm Total Length, tip to tip...

Vespa PX PE T5 LML Super Sprint Front Brake Clutch Gear Cable Adjuster - M5  

Cable Nipple - Split Barrel Nipple - Fits over pear shaped cable ends. Fits into Clutch lever / Front Brake Lever All Models of Lambretta and Vespa...

Cable - Small Cable Top Hat ID 7mm OD 8mm Total Length 13mm Locates the clutch and front brake outer cables into the headset base.