Wurth Putty Epoxy Repair Stick For Steel Application - 175mm/180g

Wurth Putty Epoxy Repair Stick For Steel Application - 175mm/180g

An epoxy based hand malleable putty with the hardener forming the core of the stick
When mixed the product rapidly hardens ensuring rapid repairs to many different components and materials.
When fully cured the material can be drilled, tapped, filed, sanded or overpainted.
Simple to use putty formulation ensures no runs or drips of product.
Adheres even in the presence of liquids e.g. underwater.

Technical data:
Resin: Epoxide
Chemical Resistance: Hydrocarbons, ketones, alcohols, esters, salt solutions, dilute acids, petrol diesel and oils
Electric Resistance: 30.000 O
Dielectric Strength: 300 V/mm
Shrinkage: less than 1%
Non Volatile Content: 100%
Compressive Strength: 12.000 psi
Maximum Temperature Resistance: 120°C continuous, 150°C temporarily
Initial Cure: maximum 1 hour
Full Cure: maximum 24 hours
Shore Hardness D: 80 after 24 hours
Working Time: 3.5 minutes

Application Areas: Cylinderblocks, Heads, Castings, Damaged threads, Worn Shafts, Water Pipes, All steel components.