Vespa Electronic Kit 50 Special

Vespa Electronic Conversion Kit has 12V A.C Lighting for the Small Frame Vespa V50 Special.
This kit is the same kit as the V90, V100, V100 Sport, Primavera, ET3, PKs kit but has different wiring instructions and additional wires.

If you are unsure what your model is or what engine you have; then please compare the crankshaft dimensions necessary at http://beedspeed.com/popup_add_image.php?imagesID=1539 - Then click the "Back" arrow to return to this page.

Includes: Lightened 1.88 Kg Flywheel, Electronic Stator plate with 12 Volt AC Lighting, CDI, 12V Lighting Regulator Box, Assorted terminals to connect up to your wiring loom, Wiring and instructions necessary to use your existing wiring loom and light switch, and has Brake light switch wires for models that previously did not have one.

Please note: The wiring instructions are based around the UK 50 Special with a rectangular headlamp - the Uk version can be identified by a twin filament headlamp bulb and a rear brake light fitted as standard and the horn button contacts only make a circuit when the horn button is pressed . The Euro light switch type will need the light switch modifying ( see PDF diagram above ). The ignition cut out will only work when the lights are in the on position. The Euro light switch model appears to be showing up more frequently these days and they can be identified by only having a single filament headlamp bulb and often no rear brake light switch. Your existing 6V horn normally works fine. If you have a rear brake light switch fitted it will need replacing for the Primavera/PX type.

Beedspeed stock a wiring loom especially for the conversion which involves buying a PX mark 1 light switch and fitting a separate ignition cut out switch or button. See Electrical and Wiring Loom Sections.

If you need a new wiring loom? Beedspeed also have a standard type wiring loom that has been simplified especially for use with this kit and a standard type simplified loom for alternative switches which are available separately: email alan@beedspeed.com for any further details.