Wiring Loom Electronic Conversion 12V AC Lighting + DC Auxillary

Wiring Loom - Li 2/3/SX/GP - Electronic Conversion With Battery Facility and optional extras -

Can be used for original battery type set ups with parking lights etc. and/or for powering DC accessories.

Main Lights are AC Direct from the Regulator Box.

Battery DC Rear Brake Light
Battery DC Front Brake Light (Optional)
Battery DC Horn
Battery DC Supply for Pilot Lights if Required (Optional)
Battery DC Supply for Auxillary Lights (Optional)

See the pdf file above to view the wiring diagram.

If the battery is not being used at any point and is disconnected. The red DC wire that powers the Battery etc. can be connected in with AC lights power supply wire as an allternative to power the horn and brake light etc.

For full use of all the parking light and auxillary light facilities a DC four position battery type ignition switch and a battery charging type regulator box would have to be used.