Wiring Loom Electronic Conversion AC / DC + Inside Leg Toolbox

Wiring Loom - Li 2/3/SX/GP - Electronic Conversion With Optional Battery Facility and extras.

Main Lights are 12 Volt AC Direct from the Regulator Box.

Spare AC power supply to the Inside Leg Shield Toolbox.

Keyed AC Lighting Supply wire to Inside Legshield Toolbox for Instrument Bulbs / Keyed Spots.

Optional facility for Battery assistance. Battery can be fitted in Standard position or inside the Legshield Toolbox.

DC supply to the Headset and Inside Leg Shield Toolbox

AC Front Brake Light (Optional)

Spare wire from the Inside Leg Shield Toolbox to the Petrol Tank area for Fuel Gauge / Sensors

Ignition wire to the Inside Leg Shield Toolbox for Revs Counter.

Leave wires not being used capped off.

See the pdf file above to view the wiring diagram.

If the battery is not being used at any point and is disconnected. The red/white DC supply wire from the regulator/rectifier box often has enough power to power small DC items up to 2 amp.

For full use of all the parking light and auxiliary light facilities a DC four position battery type ignition switch is recommended.