Sold out
Product Code: BD13280
Universal inner Cable For Clutch / Front Brake / Rear Brake - All models 8mm barrel fitted - 1.9mm x 2.5 Meter
Product Code: BD11798
Lambretta or Vespa Emergency Cable Repair Kit Set for All Standard and Sports Types. Consists of: 1 x Clutch / Front Brake / Rear brake cable inner...
View full details
Product Code: BD06928
Clutch / Front Brake Inner Cable - Extra Long Has the standard short pear shaped top nipple. Requires a Split Barrel Nipple for it to fit into the ...
View full details
Product Code: BD14067
Banjo Bolt with Bleed Nipple - Thread M10 x 1.25 pitch - Zinc Plated.
Sold out
Product Code: BD01989
Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre 5mm Outside Diameter, 2.5mm Inside Diameter Grey ( Black sh...
View full details
Product Code: BD02705
Banjo Bolt with Bleed Nipple - Thread M10 x 1mm Pitch - Zinc Plated.
Product Code: BD05730
Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre - Please amend quantity to length required (eg 1x = 1mtr., 2x = ...
View full details
Product Code: BD14167
Banjo Bolt - Thread M10 x 1mm pitch Genuine Piaggio Part Number 265451
Sold out
Product Code: BD00175
Cable - Universal Outer Nylon Lined Sold Per Metre Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear 5mm Outside Diamete...
View full details
Product Code: BD03551
Venhill Hydraulic Brake Hose Banjo - Chrome Plated Fits to the end of the brake hose by tightening up the clamp nut. No Special tools required. ...
View full details
Product Code: BD06744
Banjo Bolt Dowty Washer Self-Centralising Bonded Seal M10 Priced each "The bonded seal is a metal washer with a vulcanized rubber insert f...
View full details
Sold out
Product Code: BD03795
Cable - Universal Outer Nylon Lined 50 Metres Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear 5mm Outside Diameter, 2....
View full details
Product Code: BD02005
Banjo/Caliper - Bleed Nipple M8 x 1.25mm - Zinc
Product Code: BD02606
Venhill Hydraulic Brake Hose Banjo - 45 degree angle - Stainless Fits to the end of the brake hose by tightening up the clamp nut. No Special tool...
View full details
Product Code:
Stainless Steel Braided Hose with Smooth Bore PTFE Teflon Tube.
Product Code: BD04061
Hydraulic Brake Hose Banjo - 90 degree angle - Chrome Plated. Fits to the end of the brake hose by tightening up the clamp nut. No Special tools...
View full details
Product Code: BD09638
Hydraulic Brake Hose - Rubber Protection Sleeve - 23mm x 16mm 8mm Diameter For use when fixing the hose using a clamp.
Product Code: BD05968
Banjo Bolt - Thread M10 x 1.25 mm pitch - Stainless Steel
Product Code: BD12485
Hydraulic Brake Hose Banjo - 90 degree angle - Stainless Steel Fits to the end of the brake hose by tightening up the clamp nut. No Special tool...
View full details
Product Code: BD00677
Venhill - Banjo Bolt - Thread M10 x 1mm pitch - Chrome Plated.
Product Code: BD06228
Banjo Bolt - Thread M10 x 1mm pitch - Stainless Steel
Product Code: BD00223
Brake Hose - Banjo/Caliper - Bleed Nipple M8 x 1.25mm - Chrome
Product Code: BD11346
Venhill Hydraulic Brake Hose Banjo - 45 degree angle - Chrome Plated Fits to the end of the brake hose by tightening up the clamp nut. No Specia...
View full details
Product Code: BD10914
Brake Hose - Vespa GT - Rear - Genuine Piaggio Spare Part Approx Overall Length (Tip to tip) 200cm GT/GTS - Please compare old hose or measure r...
View full details
Sold out
Product Code: BD11516
Brake Hose - Vespa GT - Front - Genuine Piaggio Spare Part Approx Overall Length is 120cm GT/GTS 2005> - Please compare old hose or measure r...
View full details
Product Code: BD13121
Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear 50 Meter - 5mm Outside Diameter, 2.5mm Inside Diameter Black
Product Code: BD09154
Brake Hose - Straight Male Hydraulic Connection - 1mm x 10mm
Product Code: BD14108
Banjo Bolt - Thread M10 x 1mm pitch - Zinc Plated.
Sold out
Product Code: BD17643
Clutch & Throttle Inner Cable Repair Kit with Assorted Nipples
Product Code: BD07704
Venhill - Banjo Bolt - Thread M10 x 1.25 pitch - Chrome Plated. Take 6mm Allen Bolt
