Vespa Cable Accessories*

Cable - Cable Nipple - Quick Action Throttle - Flush - 5.5mm

Cable Nipple Kit - For Rebuilds Kit Contains:3 x Gear and Clutch trunnions for the Gear Selector Box and Clutch Arm.3 x 5mm Cable Adjusters for Clu...

Vespa Cable Trunnion - Gear and Clutch - Engine End

Dellorto Carburettor Cable Adjuster with 90 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Emergency Cable Repair Kit Set for All Standard and Sports Types Consists of: 1 x Clutch / Front Brake / Rear brake cable inner with M8 Barrel. 1 x...

Cable - Cable Adjuster and Nut - M5 - Polished Stainless Steel For Vespa Front Brake / Clutch / Gear Thread size = 5mm Total Length, tip to ...

Cable - Cable Adjuster - M5 For Vespa Front Brake / Clutch / Gear  

Vespa - Cable - Clutch Cable Adjuster + Stainless Steel Nut - Genuine - 4cm Long M5 Cable Adjuster, longer 4cm type Genuine Piaggio Part Can als...

Cable - Cable Adjuster - M7 For Lambretta Gear / Clutch or Vespa Rear Brake.

Tool - Cable Puller - With Thumb Lock Pulls Cables and Slides NippleThird Hand Suitable for all cables As used on the following, Auto scooters Mot...

Vespa Cable Trunnion - Gear and Clutch - Engine End

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Vespa - Cable Clamp Assembly - Rear Brake LML STAR DELUXE VESPA 100 VESPA 100 SPORT VESPA 150 GL VESPA 150 SPRINT VESPA 150 SUPER VESPA 5...

Vespa PX, PK, T5 Classic, T5 - Plastic Cable End Cap - Short - For Gear or Throttle Cable. PX, PE, T5 Classic Headset Requires 2 short, 1 Long T5 m...

Cable Nipple - Split Barrel Nipple - Fits over pear shaped cable ends. Fits into Clutch lever / Front Brake Lever All Models of Lambretta and Vespa...

The carb caps from Crazy Monkey Development are a massive step forward.They replace your existing carb cap and the throttle cable is not just perfe...

Vespa PX PK T5 Classic - Headset Gear Cable End Cap - Long - Plastic Headset Requires 2 short, 1 Long Alternative part number NT-139913

Adjustable Cable Nipple - Thin 4mm - Ussually slots into the Carburettor pulley arm - 4mm Attaches to the throttle inner cable.

Vespa - Clutch Cable Gator/Gaiter/Gaitor/Grommet - PX, PE, T5, Rally, Super, Old Vespa, All Large Frame, and LML Fits between the M5 cable adjuste...

Cable - Cable End Caps Dimensions: 5mm inside diameter, 10.5mm long

Lambretta or Vespa Emergency Cable Repair Kit Set for All Standard and Sports Types. Consists of: 1 x Clutch / Front Brake / Rear brake cable inner...

Cable - Small Cable Top Hat ID 6mm OD 7mm Total Length 9mm Locates the clutch and front brake outer cables into the headset base.

Vespa - Cable - Cable Top Hat Split ID 8.2 OD 9.5mm Total Length 17mm Locates the clutch and front brake outer cables into the headset base.

Cable Cover - Packet 1.5 metre x 5mm Internal Diameter (can be use on cables around this thickness) Available in Red, Blue or Yellow - Glossy (ca...

Cable Cover - Packet 1.5 metre Length 10mm internal diameter (can be used on thicker cables buy wrapping around) Suitable for speedo cables. ...

Vespa - Rear Brake Cable Adjuster Nut - For models with the adjuster fitted to the Rear brake inner cable. Vespa T5 M6 Thread.

Cable Cover - Packet 1.5 metre x 5mm Internal Diameter (can be use on cables around this thickness) Available in Red, Blue or Yellow - Glossy (ca...

Vespa - Brake Light Switch - Front - Compression Type - Inserts Into Outer Cable. How to fit to a scooter that does not normally have a front...

Cable Cover - Packet 1.5 metre 6.2mm internal diameter (can be used on thicker cables buy wrapping around) Chrome Effect

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Cable Barrel Nipple - M5.5mm diameter x 6mm wide - Solder on Ussually used for Throttle or Gear pulley.