Lambretta Clutch*

Lambretta - AF Rayspeed 6 Plate Competition Clutch 46 Tooth Version, supplied with GP type clutch brass pluger operartion. Fits Li/SX with GP chai...

Lambretta Clutch Holding Tool Sits on the Lambretta clutch spider with the handle between the spaces in the crown wheel... locking the clutch spide...

Lambretta - Clutch Plates - Set of 6 for the AF Rayspeed Six Plate Road Cassette Clutch. (J1-C3)

Lambretta - Clutch - AF 6 Plate Road Clutch Conversion Pressure Plate For Li This Top Bearing Pressure Plate can be used in conjunction with an A...

Lambretta - AF Rayspeed 6 Plate Competition Clutch 47 Tooth Version with GP type clutch brass pluger operartion. Fits Li/SX with GP chaincase sid...

Lambretta - Outer Clutch Sprocket/Crown Wheel 46 Tooth - Li, SX, TV Cush drive type for use with needle roller bearings. Page 3 Li - Part 18

Lambretta - AF 6 Plate Road Clutch Bell For use with AF Rayspeed 6 Plate Competition Clutches

Lambretta - AF 6 Plate ROAD Clutch Metal Holding Tool For use with AF Rayspeed 6 Plate Competition Clutch. Not suitable for the six plate Race ...

Lambretta - AF 6 Plate Road Clutch Allen Bolt Set (Set of 5) For use with AF Rayspeed 6 Plate Competition Clutches  

Lambretta - AF 6 Plate Road Clutch Spring Set (Set of 5) For use with AF Rayspeed 6 Plate Competition Clutches

Lambretta - Outer Clutch Sprocket / Crown Wheel 46 Tooth - GP 125cc and GP 150cc Solid type for brass bush fitting. Page 3 GP - Part 17

Lambretta - Clutch - AF 6 Plate Road Clutch Conversion Pressure Plate For GP This Top Bearing Pressure Plate can be used in conjunction with an AF ...

Lambretta - AF 6 Plate Road Clutch Spider For use with AF Rayspeed 6 Plate Competition Clutches

Lambretta Clutch Spring Alignment Tool and Clutch Holding Tool.

Lambretta - Clutch Arm, Gear Pivot Arm, Small Rear Gear Tiebar, Brake Arm and Brake Pedal Circlip Kit. Polished Stainless Steel

Lambretta Clutch Tab Washer - All Models Page 3 GP - Part 19

Lambretta - Standard Surflex Clutch Plates - All Models Four Cork Plates. Page 3 GP - Part 15

Lambretta - Engine - Top Sprocket 14 to 21 Tooth Standard for Li SX TV GT GP125 GP150 is 15 tooth Standard for GP 200 is 18 Tooth Page ...

Lambretta Clutch Compressor (4 Hole ) Great quality product. You'll only need one in your lifetime.    

Lambretta - Clutch Arm - Polished Stainless Steel - All Models Page 3 Gp - Part 2

Lambretta - Top Sprocket Bolt - All Models - Heavy Duty

Lambretta - Clutch - Clutch Arm Spring - All Models Stainless Steel

Lambretta - Shim For Gear / Clutch / Brake Arm - All models 12mm x 18mm x 1mm. Page 3 Li - Part 5

Lambretta - Engine "O" Ring for Rear Brake / Front Brake / Gear and Clutch Arms - All Model Sold Singular 11.91X2.62

Lambretta - Bearing - Clutch Bush - GP Page 3 GP - Part 22

Lambretta - Standard Clutch Plates - All Models Four Cork Plates. Indian Brand. Page 3 GP - Part 15  

Lambretta - Clutch - Clutch Operating Brass Plunger - GP Page 4 GP - Part 9

Lambretta - Clutch - Centre Spider - All Models Page 3 GP - Part 18

Lambretta - Clutch - Surflex Clutch Plate Kit - All Models Four Corks, Three Steels  Page 3 GP - Parts 15, 16 and 20, full set.

Lambretta - Clutch - Standard Clutch Outer Spring Kit - All Models Consists of five springs

Lambretta - Clutch Shim - All Models Page 3 GP - Part 28 Standard size 0.8mm

Lambretta - Clutch - Clutch Operating Thimble - Li/SX Page 3 Li - Part 9

Lambretta - Top Sprocket Spring Cap - All Models Page 3 GP - Part 26 Page 3 LI - Part 27