Lambretta Gearbox & Transmission*

Lambretta - Race Chain Tensioner Double Life Nylon Block - When the eventual onset of wear occurs, the block can be rotated 180 degrees. Pull down...

Lambretta Gearbox Complete - Li 150 Cluster - 11/14/17/20 Loose Gears - 50/41/37/34 Indian Type

Suitable for all Lambrettas.

Lambretta Engine Case Gear Swivel Arm and Pivot Piece - Does not include Circlip

Lambretta - Clutch Arm, Gear Pivot Arm, Small Rear Gear Tiebar, Brake Arm and Brake Pedal Circlip Kit. Polished Stainless Steel

Lambretta - Engine - Top Sprocket 14 to 21 Tooth Standard for Li SX TV GT GP125 GP150 is 15 tooth Standard for GP 200 is 18 Tooth Page ...

Lambretta Chain Tab Washer All Models Page 3 - Part 30

Lambretta - Engine - Gear Swivel Arm and Pivot - With Bearing - Stainless Steel Bearing mechanism for easier gear change. We recommend this p...

Lambretta - Gran Turismo Race Chain Tensioner Top Quality British Made Double Life Nylon Block - When the eventual onset of wear occurs, the block...

Lambretta - Top Sprocket Bolt - All Models - Heavy Duty

Lambretta - Gearbox Endplate Nut And Washer Kit - M7 - Stainless Steel 6x M7 Nut 6x M7 Spring Washer

Lambretta - Gear Selection External Tie Bar - Highly Polished Stainless Steel - Looks like Chrome.

Lambretta Chain Tab Washer Stainless Steel All Models British Made Page 3 - Part 30

Lambretta - Gearbox Endplate Stud M7 - All Models - Oversize M8 x 1.25mm pitch one end (10mm Long), M7 Shank in the middle (7mm Long), M7 x 1m...

Lambretta - Gearbox Selector Sliding Dog - All Models Page 4 - Part 29

Lambretta - Gearbox Main Shim 1.4mm Thick for Special Shimming Page 4 - Part 21 1.4mm Thickness - ( Standard shim is 2mm )

Lambretta - Gearbox Main Shim 1.5mm Thick for Special Shimming Page 4 - Part 21 1.5mm Thickness - ( Standard shim is 2mm )

Lambretta - Gear Selector Ball Bearings - All Models Sold as pair. Page 4 - Part 31

Lambretta - Top Sprocket Spring Cap - All Models Page 3 GP - Part 26 Page 3 LI - Part 27

Lambretta - Gearbox Main Shim Page 4 - Part 21 Select Thickness - Standard is 2mm

Small Stainless Steel Circlip for Lambretta Rear Gear Arm

Lambretta - 82 Link Chain - Regina One Piece Chain For 47/18 Standard sprockets From the mid 1940s to today, considerable resources and co...

Lambretta - Chain Li, SX, TV, GT, GP125, GP150 ( standard 46/15 sprockets ) 80 Link.Alternate Combinations 81 Link GP200 ( 47/18 standard sprockets...

Lambretta - Gearbox - 1st Gear - Li 150 Italian, Li 150 Special Italian, Li 150 Spanish, GP 200 Indian, 50 Tooth - 115.3mm Outside Diameter. ...

Lambretta - Gearbox Main Shim 1.8mm Thick for Special Shimming Page 4 - Part 21 1.8mm Thickness - ( Standard shim is 2mm )

Lambretta - Gearbox - Complete - Close Ratio Cluster is one piece - 11/13/16/18 Loose Gears - 50/41/38/36  

Lambretta - Gear Tie Bar / Gear Arm Rubber Cover. Page 16 - Part 7  

Small Circlip for Lambretta Rear Gear Arm

Lambretta - Oil Thrower - All Models Fits under the top sprocket assembly. Page 2 - Part 8

Lambretta - Oil Thrower - All Models Fits under the top sprocket assembly. Page 2 - Part 8

Lambretta - Gearbox Main Shim Page 4 - Part 21 Select Thickness - Standard is 2mm

Lambretta - Gearbox Main Shim Page 4 - Part 21 Select Thickness - Standard is 2mm