Vespa Handlebars*

Vespa - Headset Top Screws PX, PE, EFL, T5 Classic, PK - Stainless Steel. Consists of four screws and washers as pictured. هت هت

Vespa Handle Bar Lever Pivot Bolt and nut - All Vespa but for: PK and PX Disc R/Hand Lever Same as Original Part No. 150235/012136

Vespa PX, PK, T5 Classic, T5 - Plastic Cable End Cap - Short - For Gear or Throttle Cable. PX, PE, T5 Classic Headset Requires 2 short, 1 Long T5 m...

Vespa - Headset - Throttle Tube Return Spring PX, PE, T5, PK

Vespa PX PK T5 Classic - Headset Gear Cable End Cap - Long - Plastic Headset Requires 2 short, 1 Long Alternative part number NT-139913

Vespa - Headset - Twist Grips - Standard P125X, P150X, P200E, Rally, Sprint, Super, Old Vespa Both ?ò24mm Length 135mm Black - 1 Pair Wit...

Vespa - Twist Grips - Standard - Red - PX, PE RALLY 24mm Red with Piaggio Logo B (J3-N1)

Vespa - Handle Bar Lever Pivot Bolt for Vespa PX Disc - Semi Polished Stainless Steel Brake Lver Side. + M6 Nylock Nut Priced Each Can be polishe...

Vespa - Headset Top - Chrome - PX Disc Vespa Type with Mirror Holes. - If these are not required on your LML search Mirror Hole Covers on our webs...

Vespa - Headset Top Screws PX, PE, EFL, T5 Classic, PK - Stainless Steel. Sold individually. Requires 4 (M5x40) Part 20 هت

Cable - Small Cable Top Hat ID 6mm OD 7mm Total Length 9mm Locates the clutch and front brake outer cables into the headset base.

Twist Grips - Plastic Chrome Foam for Harley, Lambretta, Vespa. 1" + 1" (25mm) Ex Part No. STAN-HBG039

Vespa LML - ShortåÊBrass Insert for Headset Bottom Throttle and Gear Tubes. LML and PX/PE Disc Model with LML Headset Bottom fitted. O.R. LML India...

Vespa - Cable - Cable Top Hat Split ID 8.2 OD 9.5mm Total Length 17mm Locates the clutch and front brake outer cables into the headset base.

Vespa - Headset Cable Pulley Shim - Wavy PX, PE, Disc, T5, PK. Requires one flat and one wavy for each pulley. Part Number 6 139890

Vespa - Handle Bar Dog Leg Levers - Adjustable Alloy Sold as Pair

Vespa - Headset Cable Pulley Shim - Flat PX, PE, Disc, T5, PK. Requires one flat and one wavey for each pulley. Part Number 7

Vespa PX Disc front Brake Handle Bar Lever - Standard - PX Disc Same as Original Part No. 494804

Vespa - Headset Top Mirror Hole Bung/Rubber/Grommet/Blank Overall Diameter 25mm, for use on Approx 18-24mm Hole Sold individually

Twistgrips - Polished Stainless Steel - Lambretta, Vespa Suitable for Lambretta  S3 GP Vespa PX Models T5 Models V50, V90, V100, Prim VBB, GS Harle...

Vespa Handle Bar Lever Anti Vibration Washers - Fit between the lever and the handlebar on the lever pivot bolt All Vespa but for: PK and PX Disc ...

Vespa - Hub - Front Hub Backplate O Ring - PX/PE/T5/PK125 Part Number 14 177408

Vespa - Twist Grips - Standard V50, V90, V100, Prim, ET3. Black - With Piaggio Emblem. Both ?ò24mm Part 13 Same as Original Part No. 1...

Cable - Small Cable Top Hat ID 7mm OD 8mm Total Length 11mm Locates the clutch and front brake outer cables into the headset base.

Vespa Handle Bar Lever Pivot Bolts - Pair - PX Disc - Semi Polished Stainless Steel Can easily be polished further for custom bikes.

Sundance Twistgrips - Pair - Both one inch Suitable for Lambretta (Series 3), Vespa, Harley Davidson Fitted with Black "O" Rings as Standard. Color...

Vespa - Twist Grips - Standard - Grey - PX, PE RALLY 24mm x 135mm 1 Pair Grey with Piaggio Logo

Cable - Cable Top Hat / Cable End Cap - Vespa T5 Normally requires three. Standard Top Hat can be used but doesnt locate into place the same. Lo...

Headset Top - PX Disc -  No Mirror Holes Now With No Mirror Holes For A Super Clean LookFitsLML STAR 125 2 STROKE LML STAR 125 4 STROKE LML STAR 15...

Twist Grip Glue 5ml Tube -

Sundance Twistgrip "O" Rings - Set of 30 Select Color - Black, Green, Salmon Pink or Yellow.  

Vespa - Kickstart Shaft O Ring - All Models 15.88x2.62

Vespa - Headset Plastic Gear Pulley - PX/PE/Disc/T5/PK Part 9 Same as Original Part No. 139796