Universal Tools*

Oil Measure Jug 100ml   Same as Original Part No. 085058

STEERING NUT RING SPANNER     Made from 304L Stainless steel, will last a lifetime.

Beedspeed Timing Disc in Degree's with Timing Instructions Alloy Disc 16.3cm Diameter with 1.3cm Centre Hole . Link to Lambretta and Vespa Ti...

Tool - Cable Puller - With Thumb Lock Pulls Cables and Slides Nipple Suitable for all cables As used on the following, Auto scooters Motorcycle Ca...

Traveler - Oil Measure/Mixture Bottle with Screw on Cap - Polini - 250ml - 1% 2% 3% 4% 5% 6% and 7% Markings

STEERING NUT C SPANNER 37mm

Oil Measure/Mixture Bottle with Screw Shut Easy Squeeze Top ('Squeeze Fuel-Oil Dispenser') A new cleverly designed oil mixture bottle, an indispen...

Anabond RTV Silicone sealants are widely used for making high performance, low-cost form-in-place gaskets. Cured silicone rubber does not se...

Tool - Oil Measure Jug And Cap 100mls B (J3-C6)

Stops nuts and bolts vibrating loose and seals threads against leaks and corrosion Granville Lockthread is a medium strength anaerobic compound whi...

Tool - Piston Locking Tool - 14mm

Tool - Inner Tube Puncture Repair Kit As pictured, supplied in small green case.

Tool - Oil Can - Pump Action - 1/2 Pint - Suitable for cable lubrication or engine filling.     C (J3-A4)

Universal Con Rod Holding Tool, suitable for Lambrettas and Vespas.Laser cut from 304L Stainless Steel, will last forever!

TUBELESS TYRE PUNCTURE REPAIR KIT Kit Consists of: 1x Carry Case 1x Probe 1x Eye Needle 1x Rubber Cement 1x Knife 5x Strip Plugs - Enou...

Tool - Tyre Levers - Pair - 25cm/10 Inch For all tyres.

Fork Oil Syringe - Capacity 60ml B (J3-C5)

Tool - Piston Pin Removal Tool - 16mm - Lambretta & Vespa P200/T5

SPRING PULLING HOOK HEAVY DUTY - Stainless Steel Suitable for Stand / Exhaust Springs etc. 8 Inch / 20cm Long

Tool - Battery Acid Funnel B (J3-D5)

Petro Patch Putty - Granville - Heavy Duty - 50gram Granville Petro Patch Putty is a fast acting Epoxy Putty with hundreds of uses around the auto...

SPARKPLUG BOX SPANNER 65mm Long with Swivel Arm For 21mm spanner type Plugs such as: NGK AB and B types. such as B8ES, B6HS B (J3-F6)

BATTERY CHARGER - UK 3 PIN TYPE PLUG Selectable ON OFF 6 V or 12 V Charging Voltage. Includes Extra Hook Up Wire that can be left permanently fixed...

Tool - Tyre Levers - Pair - 37cm/15 Inch For all tyres.

POINTS AND SPARK PLUG GAP FEELER GAUGE -?锑 3.5" 32 Blade - Imperial and Metric.

Allen Key 3.5mm Suits Lambretta cable Trunnions A (J3-E7)

Tool - Pepair Roadside Tyre Rapid Inflation - 16g CO2 Threaded Canister/Cartridge 3 Pack (as pictured) Has to be sent courier due to it be...

SPARKPLUG BOX SPANNER with T Bar For 16mm spanner type Plugs such as: NGK BC, BK, C and BC types

Tool - Double Screw driver - Vespa And Lambretta

UNIVERSAL - ADJUSTABLE - FLYWHEEL / VARIATOR or CLUTCH HOLDING TOOL. WITH 5 AND 9mm PINS, ADJUSTABLE STOP SCREW TO KEEP TOOL OPEN AT A SET DISTANCE...

Tool - 3 In 1 - High Quality Laser Cut Stainless Steel Consists of, Clutch Holding Tool, Clutch Nut Tool and Variator Locking Tool, in one easy to...

Tool - Brake & Clutch Bleeder Kit - Syringe Type

COMPRESSION TESTER Fits all standard 14mm and 18mm spark plug threads D (J3-A11)

To Fit Screw of 4mm A (J3-E6)