Vespa Exhaust Spares*

Vespa LML Four Stroke Exhaust Gasket 33mm o/d - 28mm i/d

Shims for fitment between the Cylinder Exhaust Flange and the Exhaust - P200E, PX200E, Rally 200 Two Shims - .1mm thick and .15 mm thick. SIP Pro...

STAINLESS STEEL RACE EXHAUST CLAMP Adjustable from 40mm to 43mm

STAINLESS STEEL RACE EXHAUST CLAMPS Adjustble from 47mm to 51mm Head - 10mm Spanner Size.

STAINLESS STEEL RACE EXHAUST CLAMP Adjustable from 37mm to 40mm

STAINLESS STEEL RACE EXHAUST CLAMPS Adjustable for 51mm to 55mm

Exhaust - Clamps - Big Bore Stainless Clamp - Adjustable from 43mm to 47mm

Exhaust - Clampand bolt - 44mm Complete with nut and bolt

Vespa - Large Exhaust Mounting Bolt Fits PX, PE, T5, Rally, Super, Old Vespa M10 x 1.5mm pitch - See Fasteners if M10 Nut is reqired for sports e...

Exhaust Spring for Exhausts such as Scorpion, PM, Taffspeed, JL, Sterling Stainless Steel

Exhaust - Sterling - Performance - Manifold - Vespa PX 125/150 - Replacement for Left Hand Exhausts Stainless Steel

Lambretta M7 Brass Exhaust Nut Requires 2 Part Number 109 SIL

Sterling Exhaust Replacement Rubber Mounting. Lambretta Crankcase Side Bracket Vespa Main Mounting Bracket. 22 x 8.5 x 7mm Sold Individually - Requ...

Exhaust - Sterling - Performance - End Can Gasket

Vespa - Large Exhaust Mounting Bolt - Stainless Steel PX, PE, T5, Rally, Super Bolts into swinging arm section of crankcase. Sold individually

Stainless Steel Exhaust Tail Pipe Piece / Deflector - 20mm Inside Diameter If the bolt area is in view it could do with polishing up.

Vespa - Cylinder Barrel Exhaust Flange - P200E, PX200E, Rally 200 Screws into Cylinder 45mm o/d Same as Original Part No. 130143

Vespa - Exhaust Deflector - Chrome For fitting to tail pipe of up to 20mm Diameter. Same as Original Part No. 610157M

Exhaust Spring for Exhausts such as Scorpion, PM, Taffspeed, JL, Sterling

Exhaust - Baffle Packing Wool - 50cmx50cm - Thick Type Flat Sheet 50 x 50 x Approx 14mm

Vespa - Large Exhaust Mounting Bolt PK Model

Exhaust Spring for Exhausts such as Scorpion, PM, Taffspeed, JL, Sterling Heavy Duty with Swivel at Both Ends.

Exhaust - Sterling Performance R/H - Rear Bracket Replacement rear braket for use on Sterling Performance Right Hand Exhausts .  

Exhaust Rubber Mount

Fastener - Hexagon Flange Nut - Copperized Exhaust Flange Nut - M7x1mm Pitch Exhaust nut for Gilera 180, DNA 125/180, Piaggio 125/180, Hexagon, ...

Exhaust Spring for Exhausts such as Scorpion, PM, Taffspeed, JL, Sterling

Exhaust - Sterling - Performance - Right Hand End Can - Vespa Polished Alloy Suitable for all Vespa Sterling performance exhausts  

Exhaust - Sterling - Bracket - Vespa - Left Hand Replacement Suitable for all Vespa Sterling left hand performance exhausts

Vespa - Cylinder Barrel - Exhaust / Inlet Studs - V50, Primavera M6 - Requires M6 Nut and Washer - See Fasteners Section Sold individually. ...

Vespa - Gasket - Exhaust - 8mm Stud Holes - Some Models of ET3 and 135cc kits. Stud spacing as the V50, Pk50, V90, V100, V100 Sport, Primavera , ...

Exhaust Spring for Exhausts such as Scorpion, PM, Taffspeed, JL, Sterling

Exhaust Spring for Exhausts such as Scorpion, PM, Taffspeed, JL, Sterling

Exhaust Manifold Convertor - For LML 150 to Fit PX Exhaust for Vespa 125 GTR 2迓?/TS/150 Sprint 2迓?/V/Super 2迓?/PX125 -150/PE/Lusso/Cosa steel, for...

Exhaust Rubber Mount And Nuts