Lambretta Cable Accessories*

Cable - Cable Nipple - Quick Action Throttle - Flush - 5.5mm

Dellorto Carburettor Cable Adjuster with 90 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Vespa Emergency Cable Repair Kit Set for All Standard and Sports Types Consists of: 1 x Clutch / Front Brake / Rear brake cable inner with M8 Barre...

Tool - Cable Puller - With Thumb Lock Pulls Cables and Slides NippleThird Hand Suitable for all cables As used on the following, Auto scooters Mot...

Lambretta or Vespa Emergency Cable Repair Kit Set for All Standard and Sports Types. Consists of: 1 x Clutch / Front Brake / Rear brake cable inner...

Cable - Cable Adjuster - M7 For Lambretta Gear / Clutch or Vespa Rear Brake.

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Cable Nipple - Split Barrel Nipple - Fits over pear shaped cable ends. Fits into Clutch lever / Front Brake Lever All Models of Lambretta and Vespa...

Adjustable Cable Nipple - Thin 4mm - Ussually slots into the Carburettor pulley arm - 4mm Attaches to the throttle inner cable.

Universal Cable Trunnion 7mm diameter 2cm Total Length Spanner Size 8mm.

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Dellorto Carburettor Cable Adjuster with 70 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Lambretta - Front Brake Cable Top Hat - All Models Locates the front brake cable into the hub. Page 16 - Part 76

Cable Barrel Nipple - M5.5mm diameter x 6mm wide - Solder on Ussually used for Throttle or Gear pulley.

Lambretta - Cable - Trunnion Kit -Stainless Steel Set of three stainless steel trunnions. Key Not Included

Lambretta - Cable - Trunnion Kit With Key

Rear Inner Easy Clutch Cable for "universal type" easy clutch - All models Trunnion and Allen key are seperate

Lambretta - Clutch - Easy Clutch Reduces the effort needed to pull in the clutch by 30% - This kit includes all the required inner and outer cables...

Lambretta - Cable Gaiter Set - Set Of Three As pictured, 2x Gear Cable Gaiters & 1x Rear Brake Cable Gaiter Black

Brake Light Switch - Front or Rear Compression Switch - Inserts Into Outer Cable How to fit to a scooter that does not normally have a front brake ...

Lambretta Rear Brake Pedal Cable Clamp Assembly - All Models

Lambretta - Clutch or Gear Cable Adjuster Screw And Nut - Stainless Steel - All models Page 16 - Parts 25 + 26

Lambretta - Handlebar Cable Guide

Lambretta - Rear Brake Cable Holder - All Models Page 16 - Part 38

Cable - Cable Nipple - 3mm x 3mm Slide Nipple - Requires Soldering - Inside hole is tapered at one end to prevent the solder from pulling through....

Lambretta Cable Adjuster Block - All Models - Polished Includes 3 x Adjuster Screws + Nuts, 2 x Fixing Bolts and Gasket

Lambretta Front Brake Cable Adjuster - Quality Stainless Steel Page 16 - Part 65

Dellorto Carburettor Cable Adjuster with 50 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Lambretta Rear Brake Cable Adjuster - Quality Stainless Steel Page 16 - Part 1

Lambretta - Choke Arm Assembly Cable Top Hat - Metal

Cable - Cable Nipple - Short Trumpet/Pear - Brass Solder On 5mm Long x 10mm Trumpet With 2mm Hole

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre 5mm Outside Diameter, 2.5mm Inside Diameter Grey ( Black sh...

Lambretta - Short Cable Trunnion For Clutch Cable and Outer Gear Swivel.