View All Vespa Bearings, Seals & Gaskets*

Vespa - Carburettor Gasket Set - Si Carburettor Autolube and None Autolube Models PX, PE, Disc, T5, T5 Classic, Cosa, Super, Sprint, Rally, Old Vespa.

Vespa - Gasket Set - Engine - P125X, PX125E, PX125EFL, PX125 DISC, P150X, PX150EFL, Cosa 125 Same as Original Part No. 154564

Vespa - Oil Seal Kit -PX125E/PX150E/PX200EFL 31X62X4.3X5.8+24X35X6+30X47X6

Vespa Gasket Set - Engine - PX200EFL, Cosa 200 Same as Original Part No. 154546

Vespa - Top Steering Bearing - All Models Suitable for all models, P125/150X/200E/PX/EFL/T5/Rally/Super/Sprint/GT/V50/PK50/V90/ V100/125Prim/PK50/P...

Vespa Gasket Set - Engine - T5, T5 Classic Same as Original Part No. 154699

Vespa - External Gear Selector Box Gasket - PX, PE, EFL, Disc, T5, T5 Classic, Cosa, LML, Rally, Super, Sprint, Old Vespa. Thickness approx 0.5mm  ...

Vespa Small End Bearing V90, V100, Primavera, ET3, PK80, PK90, PK100, PK125, P125X, PX125E, PX150, Cosa 125, Super, Sprint, GT, Old Vespa. 15mm

Vespa - Gasket - Base - PX 125 LML STAR 125 2 STROKE VESPA 150 SPRINT - 3 PORT MOTOR VESPA COSA 125 VESPA P 125 X ...

Vespa - Gasket Set - Engine -Vespa 125 / 150, Super, Sprint, 150GL, Sportique, GT, Old Vespa - 2 Transfer port Type The Carb Float Bowl gasket ...

Vespa - Gasket Set - Engine - V50, V90, V100, V100 Sport, Primavera 125, ET3, PK50s, PK50xl Suitable for PK 2 and 3 studded inlet ports - 6mm an...

Crankshaft Small End Bearing - to fit a 16mm gudgeon pin Known to Fit the Following: PIAGGIO 125 / 180cc TWO STROKE ENGINE APRILIA SR 125 GILERA R...

Vespa - PX, PE, PKXL Flywheel Side Bearing 38x25x15mm Part Number 12

Vespa - Pair of Top And Bottom Steering Bearings Sold as pair. Parts 4 and 7 Same as Original Part No. 077023 / 077024

Vespa - Gasket Set - Engine - V50, V90, V100, V100 Sport, Primavera 125, ET3 Similar to the PK 50 gasket set (10 068 4050 - which can be used ...

Vespa - Bottom Steering Bearing Suitable for all models, P125/150X/200E/PX/EFL/T5/Rally/Super/Sprint/GT/V50/PK50/V90/ V100/125Prim/PK50/PK80...

Vespa - Carburettor Gasket Set - Si Carburettor LML Vespa with Reed Valve engine gaskets included, Also can be used for PX, PE, Disc, Super, Sprint...

Vespa - Engine Bearing - Drive Side - PX/T5/Sprint - Also Flywheel Side for Sprint, Super etc. BAJAJ CHETAK BAJAJ CLASSIC LML STAR DELUXE OLD VESPA...

Vespa Gasket - Between the Rear Hub Back Plate and the Engine Casing - Small Frame Vespa V50, V90, V100, Prim, ET3, ETS, PK

Vespa Gasket Set - Engine - P200E, Rally 200 Same as Original Part No. 154547

Vespa - Oil Seal Kit with 40mm Rear Hub Oil Seal - Early 150 Super, GL, Old Vespa Two port 20x62x6.5 Iron Plate Seal 20x40x6 (Square Cut Out 10...

Vespa - Drive Side Oil Seal - Metal PX / PE Electric Start and Disc Models after 1996, Cosa, T5, T5 Classic Part: 93612605 -242550 - 4311...

Vespa - Oil Seal Kit - V50/90/100/Primavera/PKS 22.7X47X7X7.5+31X19X7+19X32X7 with o'rings (C4-F1)

Vespa Gasket for Autolube Pump - PX EFL, PXE, Disc, T5, T5 Classic - and Old Autolube Vespa

Exhaust - Sterling - Performance - End Can Gasket

Vespa - Clutch Phosphor Bronze Bush - PX, PE, Disc, T5, T5 Classic, LML, Rally, Super, Sprint, Old Vespa Part Number 30 Alternative Part Number: NT...

Vespa - Crankshaft Flywheel Side Oilseal with Iron Plate Super, Sprint, Sportique, GL, Old Vespa Round Cut Out ( Interchangable with the Squa...

Vespa Inlet Gasket - Between Carb and Carb Box - Sprint, Super, Gl, Old Vespa, P125X, P150X, P200E For none autolube models

Vespa - Gasket Set - Engine - PK80 XL, PKs 100cc, PK100 XL, PK 125 XL, ETS 125cc, PKs 125cc. For 2 and 3 studded Inlet ports - Wide PK100/125cc...

Vespa - Gasket Set - Engine - SPRINT, P125X, P150X - THREE TRANSFER PORT TYPE NONE AUTOLUBE Gasket set shown is for illustration only. Same as Or...

Vespa - Gasket - Base - PX200E Model VESPA COSA 200 VESPA P 200 E VESPA PX 200 E VESPA PX 200 E DISC VESPA P...

Dellorto Gasket Set for PHBH Carburettors

Vespa - Front Fork Pinset needle roller bearing V50, V90, V100, Prim, ET3, PK50s Sold indiviually Part 29 Same as Original Part No. 090457

Vespa - O-Ring Kit - Rear Hub Backplate - PX/PE/Rally/T5 Original Style Linked Type