Free UK shipping for orders over £50! | ☎ +44(0)1472 355558
Product Code:
Carburettor - Idle Jet - Dellorto 1486 Dellorto main/idle jet part number 1486 Vespa fit: V50, 90, 100, Primavera, ET3 Fits PHB/SH/Jetex etc.- thr...
View full details
Product Code:
Oil Pipe 4mm inside diameter - 7mm outside - Clear Price per meter
Product Code: BD07674
Dellorto Carburettor Cable Adjuster with 90 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.
Product Code:
Dellorto 4 Sided Float Needle For Modern Ethanol Fuel Standard Lambretta, Vespa Large Frame, Vespa Small Frame. For Dellorto, Spaco, Jetex Carbur...
View full details
Product Code: BD01626
Dellorto Gasket Set for PHBH Carburettors
Product Code: BD00256
Carburettor - 30mm PHBH Dellorto - Two Stroke Carb. Lightweight Alloy Left hand side idle screw fitment as standard ( viewing from the front of t...
View full details
Product Code:
Fuel/Petrol Pipe 6mm inside diameter - 12mm outside - Clear Price per meter Same as Vespa Original Part No. 140539
Product Code: BD03260
Carburettor - Dellorto - PHBL 25 Rubber Mount not included. Choice of Cable or Flip Choke. Whats fitted in the carb, correct as 09/11 PHBL25 AQ26...
View full details
Product Code: BD00467
Carburettor - Bellmouth - Short 16mm - Plastic Screw on 42mm fitting - 16mm Total Length For Dellorto PHBH 28 and 30mm or similar
Product Code: BD01449
Dellorto Carburettor Cable Adjuster with 70 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.
Carburettor - 28mm PHBH Dellorto - Two Stroke Carb. Lightweight Alloy Left hand side idle screw fitment as standard ( viewing from the front of t...
View full details
Product Code: BD14180
Dellorto 4 Sided Float Needle Red Tipped, Spring/Sprung Type Si 20-24mm + Various Dellorto's Fits needle valve seat sizes 150,170,200 and 225. N...
View full details
Product Code:
Carburettor - Main Jet - Dellorto 6413 Dellorto main jet part number 6413 Fits PHB etc. - Thread size 6mm Ranges intermittently from 44 to 330 Ple...
View full details
Product Code: BD01709
Carburettor Cable Choke Assembly For Dellorto PHBH/VHSB/PHBL/VHSA/PHBE Carburettors
Product Code:
Dellorto 4 Sided Float Needle Spring/Sprung Type Si 20-24mm Fits needle valve seat sizes 150,170,200 and 225. Not suitable for seat sizes 250 an...
View full details
Product Code: BD13837
Dellorto 3 Sided Float Needle Vespa Small Frame 16mm carbs Various Small Dellorto's Part Number:2838
Product Code: BD07252
Dellorto Carburettor Cable Adjuster with 50 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.
Product Code: BD08200
Dellorto Carburettor Slide Needle Clip.
Product Code: BD14456
Dellorto Gasket Set for PHBL Carburettors
Product Code: BD06109
Carburettor - 26mm PHBH Dellorto - Two Stroke Carb. Lightweight Alloy Left hand side idle screw fitment as standard ( viewing from the front of ...
View full details
Product Code: BD00874
Race Carburettor - 30mm Dellorto Flat Slide VHSH Uses standard PHBH Rubber Mount (34mm inside diameter). Usual standard make up: Main Jet: 175-180 ...
View full details
Product Code:
Carburettor - Bellmouth - 55mm - Plastic Screw On 42mm fitting - 55mm Total Length For Dellorto PHBH 28 and 30mm or similar
Product Code: BD15091
Malossi Carburettor Cable Adjuster with 180 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.
Product Code:
Oil pipe or Carb overflow pipe - Very small 2.2mm inside diameter, 4mm outside diameter - Clear Price per meter
Product Code: BD02619
Carburettor - VHSB 34mm Dellorto Flat Slide Whats fitted in the carb, correct as 09/11 VHSB34LD 34 Idle Emulsion Tube DP266 atomiser/air corrector...
View full details
Product Code: BD07851
Carburettor - Throttle Stop/Tickover/Slide Screw Kit As pictured For Dellorto Carburettors Models PHBE PHB PHBD PHF PHBG PHBH PHBL PHM VHB SH1/2
