Lambretta Coils & Ignition*

Spark Plug Long Reach Available in grades 6, 7, 8, 9. (Nine Coldest Running) B6ES, B7ES, B8ES, B9ES

Electronic Ignition Coil, CDI Genuine Ducati Part For Lambretta and Vespa 32398112

Spark Plug Cap with .6 meter of Black HT Lead and HT Coil rubber boot. Good Secure Snap On Connection to the Spark Plug. If this item is out of st...

1Meter of HT lead

Spark Plug Long Reach Available in Grades 6, 7, 8, 9, 10. (Nine coldest running) BR6ES, BR7ES, BR8ES, BR9ES, BR10ES

Spark Plug Cap - Resistor Cover LB05F Sizes dimensions below.

Lambretta Ignition Switch - Modified for ease of wiring to electronic kits. Simplified to only have one lighting input wire to supply all of the li...

Electronic Ignition Coil - CDI Mitsubhi The HT lead shown with this is too short for use with PX and not always included.

Electronic HT Coil Rubber Boot CDI rubber boot for the wiring. As fitted to, Electric Start Models PX PX MY PX 2011 COSA T5 But will still fit ...

Introducing the new BeedTronic Automatic Advance / Retard Ignition Unit Our answer to the discontinued Agusto units  For Easier Starting, Better Ac...

NGK Spark Plug Cap - Resistor Cover LB05EMH - Fully Waterproof Rubber for compition use.

Lambretta - Ignition Switch / Tool Box Lock / Steering Lock Set - AC For Series 3 - Generally classed as for None Battery Models because there ...

HT Coil Rubber Boot - Universal For wire to Coil To fit approx 11mm post - 4mm wire hole - 45mm long 231751

Three Position Multi Use Switch  Switch Positions 0 = Ignition off - Connects green and black/white together  1 = Run with lights off - The red/whi...

Spark Plug with Fine 0.8mm Iridium Centre Electrode. The improved design insulator allows better gas flow around the firing end. The ground electro...

Spark Plug Non Resistor Cover LZFH - NGK

Spark Plug Resistor Cap - Lights Up Neon Red

Spark Plug Resistor Cap - Lights Up Neon Blue

Li Series 2 Headset Ignition Cut Out Button - Polished       Switch

Spark Plug Resistor Cover Black Rubber.

Lambretta 4 Position Ignition Switch - Suitable for AC or DC Specially produced by Beedspeed for the Modern Day Lambretta with DC Instruments. Can ...

Lambretta - Electronic Mounting Kit - Series 2 For mounting the CDI and Lighting Regulator box to the frame. As pictured includes Screws, Spring Wa...

Li Series 3 Headset Ignition Cut Out Button Page 12 - Part 27 Switch

Lambretta - Electronic HT Coil and Regulator box fitting kit/Mount/Bracket- stainless steel Fits Electronic Coil and Regulator Box in the original ...

Lambretta - Ignition Switch Set - GP - Ign./ToolBox/Steering Lock Set Includes, TV type Ignition Switch (Details below), Tool Box Lock, Steering L...

Electronic HT Coil Rubber Boot Offset As fitted to, None Electric Start Models P125X P150X PX EFL T5 COSA But will still fit Electric S...

Lambretta - GP/SX/Li Ignition Switch for Battery Models Switch Positions: -1 = Bike off - Parking lights on - Key will remove 0 = OFF 1 = Run...

Ignition Coil (High Voltage Type) Mounting hole spacing 52.5mm

Rubber Boot -  HT Lead To CDI  -  Universal - Short 27mmx17mm

Lambretta - Electronic HT Coil and Regulator box fitting kit/Mount/Bracket- stainless steel Fits Electronic Coil and Regulator Box in the origin...

Lambretta - Ignition Switch Set - Series 3 Li - Ign./ToolBox/Steering Lock Set Includes, TV type Ignition Switch (Details below), Tool Box Lock,...