Lambretta Carburettors & Spares*

Cable - Cable Nipple - Quick Action Throttle - Flush - 5.5mm

Carburettor - Slide Needle - Dellorto - X Type - 9477 - PHBH Range X1 Through to X84 Click here for Needle Information Page/s

Carburettor Rubber Mount To suite: Amal Dellorto VHSA 30 / 32mm Mikuni TMX 32mm, 35mm 39mm Inside Diameter. Uses 32mm to 50mm Hose Clamp

Carburettor - Clamp on Short Bell Mouth With Gauze - Alloy - Malossi - 42mm fitting - 50mm Total Length - Includes Clamp For Dellorto PHBH 28 an...

Lambretta - Choke Arm Assembly - Chrome - S3 And GP

Lambretta Choke Arm Assembly - Polished Alloy and Stainless Steel Parts Series 2

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Dellorto 4 Sided Float Needle For Modern Ethanol Fuel Standard Lambretta, Vespa Large Frame, Vespa Small Frame. For Dellorto, Spaco, Jetex Carbur...

Dellorto Carburettor Cable Adjuster with 90 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Carburettor - Float Needle Valve Assembly - 8649 Dellorto and Spaco, 28mm and 30mm Sizes: 200, 250, 300, 350, 400 Sizes 250 upwards have hexago...

Adjustable Cable Nipple - Thin 4mm - Ussually slots into the Carburettor pulley arm - 4mm Attaches to the throttle inner cable.

Carburettor Inlet Mounting Rubber Part Number 99.0899.0 Inside diameter 34mm at one end and 30mm at the other - Dellorto PHBH or VHSH Flat Slide to...

Cable - Cable Nipple - 3mm x 3mm Slide Nipple - Requires Soldering - Inside hole is tapered at one end to prevent the solder from pulling through....

Carburettor - Slide Needle - Dellorto - W Type - 9595 - PHBG/VB W1 W2 W3 W4 W5 W6 W8 W9 W10 W11 W12 W13 W15 W16 W17 W18 W19 W20 W21 W22 W23 W24 W...

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Cable Barrel Nipple - M5.5mm diameter x 6mm wide - Solder on Ussually used for Throttle or Gear pulley.

Carburettor -  30mm PHBH Dellorto - Two Stroke Carb. Lightweight Alloy Left hand side idle screw fitment as standard ( viewing from the front of t...

Dellorto 4 Sided Float Needle Spring/Sprung Type Si 20-24mm Fits needle valve seat sizes 150,170,200 and 225. Not suitable for seat sizes 250 an...

Carburettor - Dellorto - PHBL 25 Rubber Mount not included. Choice of Cable or Flip Choke. Whats fitted in the carb, correct as 09/11 PHBL25 AQ26...

Dellorto 4 Sided Float Needle Standard Lambretta, Vespa Large Frame, Vespa Small Frame 19mm. For Si Carburettors as fitted to Vespa as Standard. S...

Lambretta - Choke Arm Assembly Cable Top Hat - Metal

Lambretta Choke Arm Assembly - Alloy Arm / Plastic Body and Top Hat Page 6 - Part 80 through to 86

Lambretta - Carburettor - 22mm Quality Dellorto Style - Top Quality Reproduction on the original Dellorto version. GP 150/175/200cc - Provided wi...

Lambretta - Carburettor - 22mm Standard - Jetex - GP 200cc Adaptable to other models with maching inlet manifold