Universal Cable Accessories*

Cable - Cable Nipple - Quick Action Throttle - Flush - 5.5mm

Tool - Cable Puller - With Thumb Lock Pulls Cables and Slides Nipple Suitable for all cables As used on the following, Auto scooters Motorcycle Ca...

Cable - Cable Adjuster - M5 For Vespa Front Brake / Clutch / Gear  

Cable - Cable Adjuster - M7 For Lambretta Gear / Clutch or Vespa Rear Brake.

Dellorto Carburettor Cable Adjuster with 90 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Brake Light Switch - Front or Rear Compression Switch - Inserts Into Outer Cable How to fit to a scooter that does not normally have a front brake ...

Cable Cover - Packet 1.5 metre x 6.2mm Internal Diameter (can be use on cables around this thickness) Available in Red, Blue, or Purple metallic e...

Cable Nipple - Split Barrel Nipple - Fits over pear shaped cable ends. Fits into Clutch lever / Front Brake Lever All Models of Lambretta and Vespa...

Cable - Cable Adjuster and Nut - M5 - Polished Stainless Steel For Vespa Front Brake / Clutch / Gear Thread size = 5mm Total Length, tip to ...

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Allen Key 3.5mm Suits Lambretta cable Trunnions A (J3-E7)

Cable Cover - Packet 1.5 metre x 6.2mm Internal Diameter (can be use on cables around this thickness) Available in Red, Blue, or Purple metallic e...

Cable Cover - Packet 1.5 metre x 6.2mm Internal Diameter (can be use on cables around this thickness) Available in Red, Blue, or Purple metallic e...

Cable - Cable End Caps Dimensions: 5mm inside diameter, 10.5mm long

Adjustable Cable Nipple - Thin 4mm - Ussually slots into the Carburettor pulley arm - 4mm Attaches to the throttle inner cable.

Cable - Small Cable Top Hat ID 6mm OD 7mm Total Length 9mm Locates the clutch and front brake outer cables into the headset base.

Cable Nipple - PK Split Barrel Nipple For Vespa PK with original Plastic/Nylon type Levers fitted. If Chrome or Dog leg levers have been fitted ...

Dellorto Carburettor Cable Adjuster with 70 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Cable - Small Cable Top Hat ID 7mm OD 8mm Total Length 13mm Locates the clutch and front brake outer cables into the headset base.

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre - Please amend quantity to length required (eg 1x = 1mtr., 2x = ...

Rear Inner Easy Clutch Cable for "universal type" easy clutch - All models Trunnion and Allen key are seperate

Cable - Small Cable Top Hat ID 7mm OD 8mm Total Length 11mm Locates the clutch and front brake outer cables into the headset base.

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre - Please amend quantity to length required (eg 1x = 1mtr., 2x = ...

Cable - Cable Adjuster - M8

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre 5mm Outside Diameter, 2.5mm Inside Diameter Grey ( Black sh...

Cable - Universal Outer Nylon Lined 50 Metres Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear 5mm Outside Diameter, 2....

Dellorto Carburettor Cable Adjuster with 50 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Cable - Cable End Cap Dimensions: 7mm inside diameter, 11mm long

Cable - Universal Outer Nylon Lined Sold Per Metre Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear 5mm Outside Diamete...

Cable - Cable Nipple - Adjustable Top Hat Type - Overall Size - 12mm x 8mm Hole Diameter 1.9mm

Cable Adjuster Kit No soldering required, slots onto the end of the cable.

Metral Tie Wrap for Strapping Wiring loom or Cables to the Frame. 25cm Long - 6mm Wide B2-A1

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre - Please amend quantity to length required (eg 1x = 1mtr., 2x = 2mtr...