View All Automatic Cables*

Cable - Cable Nipple - Quick Action Throttle - Flush - 5.5mm

Dellorto Carburettor Cable Adjuster with 90 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Universal inner Cable For Clutch / Front Brake / Rear Brake - All models 8mm barrel fitted - 1.9mm x 2.5 Meter

Cable - Cable Adjuster and Nut - M5 - Polished Stainless Steel For Vespa Front Brake / Clutch / Gear Thread size = 5mm Total Length, tip to ...

Tool - Cable Puller - With Thumb Lock Pulls Cables and Slides NippleThird Hand Suitable for all cables As used on the following, Auto scooters Mot...

Cable - Cable Adjuster - M5 For Vespa Front Brake / Clutch / Gear  

Cable - Cable Adjuster - M7 For Lambretta Gear / Clutch or Vespa Rear Brake.

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Cable Nipple - Split Barrel Nipple - Fits over pear shaped cable ends. Fits into Clutch lever / Front Brake Lever All Models of Lambretta and Vespa...

Cable - Cable End Caps Dimensions: 5mm inside diameter, 10.5mm long

Adjustable Cable Nipple - Thin 4mm - Ussually slots into the Carburettor pulley arm - 4mm Attaches to the throttle inner cable.

Cable - Cable Nipple - Standard Throttle Pulley - 5.5mm BOLT HEAD(S2/B4) SCREW HEAD(S2/B5)

Universal Throttle Cable Inner 2.1 meters - All models Fixed Nipple At Carb end. Requires, Adjustable Nipple at Handlebar end

Gear Cable Inner - Extra Long - As used on Vespa APE 1.7mm x 2.6 meter - 6mm barrel nipple

Dellorto Carburettor Cable Adjuster with 70 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Cable - Cable Adjuster and Nut - M5 - Polished Stainless Steel For Vespa Front Brake / Clutch / Gear Thread size = 7mm Total Length, tip to tip = 3...

Brake Light Switch - Front or Rear Compression Switch - Inserts Into Outer Cable How to fit to a scooter that does not normally have a front brake ...

Cable - Cable Adjuster - M8

Cable - Small Cable Top Hat ID 7mm OD 8mm Total Length 13mm Locates the clutch and front brake outer cables into the headset base.

Clutch / Front Brake Inner Cable - Extra Long Has the standard short pear shaped top nipple. Requires a Split Barrel Nipple for it to fit into the ...

Cable Nipple - PK Split Barrel Nipple For Vespa PK with original Plastic/Nylon type Levers fitted. If Chrome or Dog leg levers have been fitted ...

Dellorto Carburettor Cable Adjuster with 50 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Cable - Small Cable Top Hat ID 6mm OD 7mm Total Length 9mm Locates the clutch and front brake outer cables into the headset base.

Cable - Small Cable Top Hat ID 7mm OD 8mm Total Length 11mm Locates the clutch and front brake outer cables into the headset base.

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre 5mm Outside Diameter, 2.5mm Inside Diameter Grey ( Black sh...

Metral Tie Wrap for Strapping Wiring loom or Cables to the Frame. 25cm Long - 6mm Wide B2-A1

Cable - Cable End Cap Dimensions: 7mm inside diameter, 11mm long

Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear Sold Per Metre - Please amend quantity to length required (eg 1x = 1mtr., 2x = ...

Throttle Cable Inner 2.1 meter- Fixed Nipple At Top for handlebar throttle pulley. Requires adjustable or solder on nipple for the carb end

Malossi Carburettor Cable Adjuster with 180 Degree Elbow. Thread: 6mm at carb end, 5mm on the adjuster Suits most carburettors.

Cable - Universal Outer Nylon Lined Sold Per Metre Universal Outer Cable For Clutch / Front Brake / Throttle/ Gear 5mm Outside Diamete...

Cable - Cable Nipple - Adjustable Top Hat Type - Overall Size - 12mm x 8mm Hole Diameter 1.9mm