MIKUNI TMX 30 flat slider Carburettor

MIKUNI TMX 30 flat slider Carburettor

Product code: BD20576
Sale price£184.99

Quantity:
In stock
Quantity:
Pickup available at 2QL Pyewipe Road Usually ready in 4 hours

MIKUNI TMX 30 flat slider Carburettor

2QL Pyewipe Road

Pickup available, usually ready in 4 hours

2QL Pyewipe Road
Unit 1
Grimsby DN31 2QL
United Kingdom

FREE UK Delivery on orders placed over £75.

Delivery is available Worldwide. See our Delivery Information page for further details.

Contact Us

Beedspeed Ltd
Unit 1, Pyewipe Road
Grimsby
DN31 2QL
United Kingdom
 
Shop Open
9:00 - 17:00, Monday to Saturday
 
Order Line and Technical Help  
Tel: 01472 355 558 (option 1)
From outside the UK Tel:  +44 1472 355 558

__ 
Enquires About Telephone Orders That Have Been Placed 
Please ring the Post Room 
Tel:  01472 355 558 (option 3)
From outside the UK Tel: +44 1472 355 558
 
For Internet Placed Orders Status Checking
Tel: 01472 355 558 (option 2)
Outside UK Tel: +44 1472 355 558

MIKUNI TMX 30 flat slider Carburettor

  • Race
  • Ø 30 mm
  • connection engine: 36mm
  • connection filter: 50mm
  • main jet 195
  • idle mixture jet 40
  • Powerjet: 80

MIKUNI flat slider carburettors have clearly lower dimensions than the VHSA/VHSB series from DELL'ORTO. This is not only evident when they are installed. The compact and short design ensures an extremely direct response. At the same time, in combination with the enclosed jet system, the voluminous float chamber also guarantees a constant composition of the mix in all ranges, even if extreme centrifugal forces and acceleration forces occur. This makes them the perfect choice for sports Malossi 210cc largeframes and classic smallframe race tuning with engine performances of up to approx. 30 PS.

We stock MIKUNI 24-35mm carburettors in the TM versions (double flat slider, screw-mounted) and TMX (even more compact design, 1 rounded off on the slider side for optimised flow, some with power jets). The power jet which is installed in the TMX 27, 30 and 38 provides the possibility of using a smaller main jet and to enable the range between 3/4 throttle and full throttle to run more leanly in order to get a better torque on straights. So that the mix does not get leaner under full load because of the smaller main jet, this is where the power jet comes in and - depending on the slider position and the load range - injects additional mix into the carburettor. As a rule the carburettors can be tuned via the main jet. In contrast to DELL’ORTO for instance, MIKUNI not only states the bore, but also the flow-through of the jets. The flow-through of the jets is linear over the entire rev range. This means the individual power ranges of the MIKUNI carburettors can be set and delineated relatively neatly from each other. As a basic guideline, the following applies: MIKUNI jet size corresponds with the DELL'ORTOx2 jet size.

Conclusion: Superb finishing and relatively easy to tune.



OEM:

Returns & Refunds

We're committed to providing a great customer service and wish our customers to be 100% satisfied with purchases. 

Please review our Returns Information or Contact Us if you have any queries.

Returns & Refunds

We're committed to providing a great customer service and wish our customers to be 100% satisfied with purchases. 

Please review our Returns Information or Contact Us if you have any queries.

Secure Payment

All our orders are 100% secure. We know this because our e-commerce system is Level 1 PCI compliant and uses 128 bit SSL encryption to ensure credit card data is secure.

Which is the same level of encryption used by large banks around the world. 

Secure Payment

All our orders are 100% secure. We know this because our e-commerce system is Level 1 PCI compliant and uses 128 bit SSL encryption to ensure credit card data is secure.

Which is the same level of encryption used by large banks around the world.