Vespa V50/Super Stator Plate Lighting Coil Set 12V + Reg

12 Volt AC Lighting Conversion Coil Set and Voltage Regulator Box with fitting Instructions.

Converts all Older Vespa 6 Volt Three Coil Stator Plates to 12V. Fits all V50, V90, V100, Prim, Super, Rally, Sprint, GT, VBB etc.

Set of 2 coils wired in series - Includes output wire to the junction box.

Standard 44mm between fixing holes.

Bulbs will require changing to 12V

Battery type Supers/Rally's/VBB etc will not require a light switch or brake light switch change but the horn will need changing.
None Battery type Supers/Rally's/VBB etc will require the light switch and brake light switch changing for the DC type or Beedspeed Conversion type.
Femsatronic Rally's As well as the above changes, a small amount of metal has to be dremeled / filed away from the new coil metal laminates for clearance to the pick up box.
Small frame vespa's 50, 90, 100 and the Primavera will require the light switch changing for the Beedspeed Conversion type or the Rally DC Type.
Vespa 50 Specials ( with 3 coil stator plates - will not fit the more common two coil stator plates ). Will require the PX Mark 1 light switch and brake light switch fitting, and a separate ignition on / off switch. Ideally the Beedspeed 50 Special 12v Conversion wiring loom is needed for this model.

Free Assistance with wiring to your existing wiring.

Basic universal wiring diagram included for wiring to your existing wiring loom. If you state what scooter it is being fitted too in the comments box at check out, and whether it previously had a battery or not, we will be more specific with the instructions.

A Range of Conversion Wiring looms are Available in the Vespa wiring loom section.