Vespa Super Sprint VBB 12V Electronic Conversion Stator Plate - Slotted

Beedspeed Vespa 12 VOLT Electronic Conversion Stator Plate for use with beedspeed electronic flywheel - Super, Sprint, Old Vespa

New Mark 2 Type with Fixing Slots.

INDIAN - FITS OLDER VESPA -
You will require a lighting regulator box and 12v bulbs: available separately.
If your scooter was a previously a battery model then the switches are suitable but the horn will need replacing, if the scooter was AC then a new light switch and brake light switch will be required - available separately, the horn although 6v usually works ok.
All the lighting power supply comes from one single green wire.
Beedspeed conversion wiring loom is available if required.

OLD VESPA
150 SPRINT S
150 SUPER
SPORTIQUE
VBB

This unit can also be used to replace the Bajaj Cheetak 6 pole ( PX type Sator ) just copy the fixing hole positions from you old stator onto the new stator. The wires are the same colour: Purple, Red, and Grey for igntion and Green for Lighting, Black for earth.