Tools, Manuals, Fasteners, Paint

Vespa - Brake Shoe Circlips - Pair Same as Original Part No. 000061

28mm x 1mm - Right Hand Thread Flywheel Puller For: VESPA PX / PE / Disc / T5 / PK / V50 / V100 / Prim / ET3 / APE50 / Cosa APRILIA SR 125 GILERA R...

VESPA Petrol/Fuel Tap/Cock REMOVING TOOL Same as Original Part No. T032973    

Oil Measure Jug 100ml   Same as Original Part No. 085058

Vespa - O-Ring Kit - Engine Case - PX/PE/Rally/T5 Set of nine O-rings Clutch Cover, Clutch arm, Kickstart Shaft, Rear Hub Back Plate, Rear Brake ...

PX/PE/Rally/Super/T5 CLUTCH NUT TOOL. Same as Original Part No. T003062Y

STEERING NUT RING SPANNER Made from 304L Stainless steel, will last a lifetime.

Lambretta Tool KitColour of pouch may slightly vary. Lambretta Pouch Contents Jack,7/8mm, 10/11mm, 12/13mm, 24/27mm Spanners Sparkplug Spanner Si...

Beedspeed Timing Disc in Degree's with Timing Instructions Alloy Disc 16.3cm Diameter with 1.3cm Centre Hole . Link to Lambretta and Vespa Ti...

VESPA Petrol/Fuel Tap/Cock REMOVING TOOL for VBB and Old Vespa models.  

Tool - Cable Puller - With Thumb Lock Pulls Cables and Slides NippleThird Hand Suitable for all cables As used on the following, Auto scooters Mot...

VESPA FLYWHEEL HOLDING TOOL

Lambretta - Clutch Arm, Gear Pivot Arm, Small Rear Gear Tiebar, Brake Arm and Brake Pedal Circlip Kit. Polished Stainless Steel

Vespa Tool kit - in Vespa Pouch Spanners: Size 6 - 7, 8 - 9, 10 - 11, 14 - 15 Reversible Flat/Phillips headed Screwdriver Spark Plug Tool with 13/1...

Fastener - NumberPlate Screw And Nut Nylon. Available in Yellow or Black.

Lambretta Clutch Compressor (4 Hole ) Great quality product. You'll only need one in your lifetime.    

Traveler - Oil Measure/Mixture Bottle with Screw on Cap - Polini - 250ml - 1% 2% 3% 4% 5% 6% and 7% Markings

Petrol Pipe Clip - Suitable for 12-14mm Pipe 9mm Wide Similar to jubilee Style Clip

Transport Fuel / Jerry Can / Small / Compact 2 Litre, Black, Designed with integrated spout. HD-PE Plastic (High-density polyethylene (HDPE) or p...

Vespa Clutch Arm Shaft O'Ring - PX, PE, T5, RALLY, SUPER, OLD VESPA, 8.73x1.78

SPARKPLUG BOX SPANNER 21 / 22 mm + Wheel Nuts 13mm + Engine Case 7mm For 21mm Spanner Size Spark Plugs such as: NGK AB and B type plugs - eg B8ES, ...

Fastener - Nut - Nyloc Nut - M8 Nuts are Stainless Steel Once you have added one to your cart you can change quantity easily be simply putting t...

Clutch Compressor for Vespa. Same as Original Part No. T020322Y

Carpride - Choke And Carb Cleaner - 250ml "Carpride Choke And Carb Cleaner is a solvent cleaner for use on internal and external surfaces. It remov...

Tyre-Sealant - Prevents Punctures - Goop for any Tube'd and Tubeless Tyres - 500ml Usage for wheelchairs, push bikes - 125ml per wheel for cars...

Fastener - Hexagon Nut M7 X 1mm Pitch 11mm Spanner Size Once you have added one to your cart you can change quantity easily be simply putting th...

Stainless Steel Circlip - Brake Shoes Li, SX and will fit GP Rear Brake Pedal all models M11 For External Fit

Fastener - Flat Washer M7 Stainless Steel Once you have added one to your cart you can change quantity easily be simply putting the number that ...

Includes All Engine Circlips

Vespa - Brake Pedal/Cable Clevis Pin Split Pin - PX/T5/PK Cotter Pin / Split Pin 1.60mm X 20mm Stainless Steel

Lambretta Engine Mounting Removal and Fitting Tool       E (J3-K8)

Fastener - Washer - Nord-lock Washer Bolt Securing System - M8 Special halved and toothed 8mm ( 5/16" ) Zinc Washer. Sold individually Inner ?ò ...